Whirlpool front-load washing machines may display various error codes to indicate specific issues. The exact meaning of the error code can vary depending on the model
1. F01 – EEPROM Error: This indicates a communication error between the central control unit (CCU) and the EEPROM (Electrically Erasable Programmable Read-Only Memory).
it indicates a part installed on main pcb have 8 pins. If you cant Replace it then change main pcb.
2. F02 – Drain Error: This suggests a problem with the drainage system, such as a clogged filter or drain hose. Check for obstructions and clear them if necessary.
check drain motor opration and voltage at drain motor, if motor is AC then 230V will indicates on multimeter, if Motor is DC then 12V will show on multimeter.
if voltage reading is not according to supply then replace main motor or call us, we will do repair same day in Nashik.
3. F03 – Temperature Sensor Error: This error code points to an issue with the temperature sensor or its connection. It may need to be replaced or reconnected properly.
set multimeter at 20K range and check its values 2 to 10 K, it means ok.
4. F06 – Motor Tachometer Error: It indicates a problem with the motor or tachometer, which measures the motor’s speed. This could be due to a motor issue or a wiring problem.
if motor is under warranty then call customer support number.
5. F11 – Communication Error: This error relates to communication problems between different components of the washer, such as the CCU and the motor control unit (MCU).
6. F22 – Door Lock Error: It means that the door lock mechanism isn’t functioning correctly. Ensure the door is closed properly and the lock is engaged.
if problem is same then replace door switch.
7. F28 – Serial Communication Error: This error signifies communication issues between the CCU and the MCU. It might require professional diagnosis and repair.
F30 – Dispenser Error: This error code indicates a problem with the detergent dispenser system. It might be related to a blocked or faulty detergent drawer or dispenser motor.
9. F70/F71 – Water Supply Error: These codes suggest an issue with the water supply. Check that the water faucets are fully open and the inlet hoses aren’t kinked or blocked.
check pressure sensor pipes for chokes or blocked.
10. F20/F21 – Water Inlet Error: These errors relate to water inlet problems, such as insufficient water pressure or a malfunctioning water inlet valve. Ensure proper water flow and clean the inlet screens if necessary.
if water is not filling in tub then replace inlet valve after testing voltage on its connectors.
If voltage is showing then replace pcb.
11. Suds or F35 – Suds Error: If there are too many suds in the machine, it can trigger this error. Use less detergent or a high-efficiency (HE) detergent specifically designed for front-load washers.
12. F08/F09 – Heater Error: These errors point to a problem with the heating element or its circuit. check heater by multimeter it should not be open or short.
check heater and voltage on its connectors after statrting a long time function.
13. F13/F14 – Water Heater Error: These codes indicate a problem with the water heater. The heater element or its connections may need inspection or replacement. check heater and voltage on its connectors after statrting a long time function.
check heater by multimeter it should not be open or short.
14. F25 – Inlet Thermistor Error: This error suggests an issue with the inlet thermistor, which monitors water temperature.
set multimeter at 20K range and check its values 2 to 10 K, it means ok.
15. F51 – Motor Control Error: This code indicates a problem with the motor control unit (MCU) or its connections.
If you are a customer then you can contact us, we will arrange engineer as soon as possible to resolve your product issues.